Skip to content
Menu
Get started free

Guides / Running the gate

Counting how many people are in the pool: a practical guide

Everyone who runs a pool wants to know how many people are in it right now. The answer is harder to get than it sounds, because a count has two sides: people arriving and people leaving. Most pools record the first and forget the second. This guide explains how a head count works in practice and where it stops being exact.

By Pool Check-in · Updated · 9 minute read

Why a count is harder than a check-in

Checking in is something staff do at a gate, so it is natural to record it. Leaving is different. People walk out whenever they like, often in small groups, often while the attendant is busy. Nobody stands at the exit with a clicker. So a system that only knows about arrivals can tell you how many people came today, but not how many are here now.

That difference matters in two cases. The first is a busy afternoon when you want to know whether the pool is crowded. The second is a board that wants to understand how the pool is used. For the board, arrivals are enough. For the afternoon crowd, only the people still on site count.

Decide what you want the number for

Before turning on anything, name the use. If you want to understand use over a season, daily totals and busiest hours are all you need and no check-out is required. The attendance report guide covers that. If you want to hold a limit at a moment in time, such as a number set by the board, you need to know who has left.

The limit itself is a decision for your board, your management company and the local authority. Pool Check-in does not tell you what the right number is. Rules about how many people a pool may hold vary by state and county, so check with the people who know your location before you publish a number.

How the count works in Pool Check-in

Turn on Check people out in the community settings, in the Check-in flow section. Then edit each amenity and enter its capacity, the number of people at once. Leave it empty for no limit.

With check-out on, today's log on the tablet shows a Check out button on every resident and walk-in check-in. One tap records that the party left. The count then adds up everyone in today's resident and walk-in check-ins who have not been checked out. The day starts at midnight in the community's time zone. Anyone left unchecked at midnight drops out of tomorrow's count.

A few things are left out on purpose. Vendors are not counted, because they have their own check-in and check-out. A check-in made without an amenity is not counted against any amenity. The strip across the top of the tablet's pages shows each amenity with its count against its capacity and a bar.

What staff see when it gets busy

The bar warns at eighty percent with Nearly full and again at capacity with At capacity. It only warns. Gate staff can still check people in. That is deliberate. Turning a family away is a decision, and the board should decide who makes it and when. If you want the gate to stop at the limit, put that rule on your handover sheet and make clear which person may enforce it.

The strip refreshes every minute while the tablet is online and is hidden while it is offline, so a stale number is not shown as if it were current. A check-out tapped with no signal is saved on the tablet and sent when the connection returns.

Getting people to check out

The count is only as good as the check-outs, so this part is a habit and not a setting. A few approaches work in practice.

  • Put one person at the gate during the busiest hours whose main job is to tap Check out as families leave. A family that is glad to be thanked on the way out will tell you they are going.
  • Print the free check-in sign and add a line asking residents to tell staff when they leave.
  • For a pool with a kiosk and no attendant, ask whether a count is worth the effort. Check-out is a staff action on the tablet. If nobody is there to do it, the count will drift.
  • Do a sweep at set times, for example on the hour, when an attendant looks at today's log and checks out the parties that have plainly gone.
  • At closing, check out whoever is left, so the day's log shows everyone as gone.

When the number is wrong

Pool Check-in counts check-ins and check-outs. It does not count heads at the gate by itself. A family that leaves without checking out stays in the count until midnight. A guest who slips in with a household and is not entered is never in the count at all. So the number is an estimate built from what staff record, and it is closest to the truth when staff are consistent.

If the number drifts, correct it by looking at the deck. Count the heads, compare with the strip, then check out the parties that have gone. Do this a few times and staff learn how far off the strip tends to be at your pool. Treat the strip as a guide and not as a measuring instrument.

If your staff will not check people out, leave Check people out off and use capacity only on your sign. That is a fair choice. A pool with no reliable count should not pretend to have one.

Showing the number to residents

The free capacity sign has a large blank for the number of people an amenity allows at one time. Write the number in with a marker and post one sign for each amenity. It needs no connection once it is up. Residents read it at the gate and know the limit before they enter.

The capacity widget for your website uses the same count as the tablet. You turn it on separately for each community in the Extras area, and it appears on your own site. It gives residents a live view of how busy an amenity is before they walk over. It is only as current as the check-outs behind it, so say so in the text near the widget if your staff cannot check out reliably.

Several amenities

Each amenity has its own capacity and its own count. A pool and a spa at the same property hold different numbers, so each shows on the strip separately. A tablet that serves several amenities asks staff to pick the amenity before the check-in, so the person counts toward the right place.

If the tablet does not serve an amenity, a check-in for it is refused. That keeps a head count from being polluted by a tablet that was never meant to record that area.

A paper count alongside

On a very busy day many pools keep a paper tally beside the tablet. That is fine. The attendant's own tally and the strip should be close. If they are far apart, the likely cause is check-outs that were not tapped, so use the paper count to catch up. The free attendant shift checklist has a line for checking the count of people at the pool.

Setting it up in order

A pool can have a working count in a few minutes:

  1. Decide the number for each amenity with your board and the local authority.
  2. In the community settings, turn on Check people out.
  3. Edit each amenity and enter its capacity.
  4. Show the attendants how Check out works on the tablet and agree who taps it.
  5. Print the capacity sign and, if you want, turn on the capacity widget.
  6. On the first busy day, compare the strip with a count by eye and adjust the routine.

This guide is general information about running a pool. It is not legal advice. Rules about pools, records and guests vary by state and county, so ask your association’s attorney about yours.