Skip to content
Menu
Get started free

Help center / Guides

Put your pool hours, capacity and check-in on your website

Extras gives you three small widgets for your community's own website. You turn each one on, copy its embed code and paste it into a page. Two of them need another setting turned on first.

By Pool Check-in · · 6 minute read

Find them

Sign in as the owner, open the community and choose Extras. Each widget has a switch, a live preview and an embed code with a Copy embed code button. The first time you turn any widget on, Pool Check-in creates the key that appears in the embed address. Paste the code into any page that accepts an embed or an iframe.

Hours and rules

This widget shows whether the pool is open now, today's hours and the hours for the week. When an amenity keeps its own hours, or there is more than one, it shows each amenity with today's hours and whether it is open now. If you wrote rules, it shows them underneath. The rules box sits in the same card, and the text is public: anyone who opens your website can read it, so leave out gate codes and private phone numbers. Nothing else needs to be turned on first.

Capacity meter

The meter shows how many people are at each amenity right now against the capacity you set, and it says At capacity when an amenity is full. It refreshes about once a minute. It counts people from check-ins that have not been checked out, so check-out must be on. If it is off, the switch is locked and the card offers a Turn on check-out button. Set each amenity's capacity in the community's amenity list. An amenity with no capacity shows its count and says no limit is set.

Self check-in

Residents check themselves in from the website with a house number and a household PIN. The widget needs Self check-in turned on for the community, with House number and household PIN chosen as one of its ways to check in. Until both are set the switch is locked, and the card links to the self check-in settings. Create the household PINs in that screen and hand them out.

A resident then sees the household, picks who is here, enters children under 16 and guests up to your limit, and picks the amenity when there is more than one. The confirmation says they are checked in.

What the check-in form refuses

The form does not check anyone in when none of your amenities is open. It then says "Pool is closed. Check-in is only available during open hours." It also does not check in a household that is banned, suspended or behind on dues, or one with a person banned by name. At the house number and PIN step it says self check-in isn't available right now, so those residents check in with the pool staff. It uses each amenity's own hours and offers only the amenities that are open. Wrong PINs are limited, and a bot check runs before a PIN is tried. When check-out is on, a household can have one open website check-in per amenity at a time.

A household PIN has only four or six digits, so anyone who learns a household's PIN can check that household in. Turn the form on only if that suits your community. Website check-ins are recorded like any other and send the same webhook events.

Turning one off

Switch it off in Extras and the embed shows a page-not-found message where the widget was, so take the code off your page as well. The embed code stays the same, so it works again if you turn the widget back on.