Skip to content
Menu
Get started free

Help center / Guides

Household standing at the gate

Every household is in good standing unless an owner or manager says otherwise. Pool Check-in has three standings that change what happens at the gate, and one way to bar a single person. This guide covers what each one does, who can set it, how the dues list upload works and what happens to a check-in made before a ban.

By Pool Check-in · · 7 minute read

The three standings

A household that is not in good standing is called Not eligible. That word is the umbrella, and it counts all three of these:

  • Banned: the household is turned away at the gate.
  • Suspended: the household is turned away at the gate, the same as a ban. A suspension is usually thought of as temporary.
  • Behind on dues: the gate shows a warning with the balance and your note. Whether staff can still check the household in is your choice.

Banning one person by name

A ban can also name one person. That person cannot be checked in, and gate staff can check in everyone else in the household. Self check-in sends the household to gate staff while anyone in it is banned. A household with one person banned still shows as in good standing, because the ban is on the person and not on the address.

Who sets them

Owners and managers set a ban from the Residents screen. Gate staff cannot, and they see the result at the gate. The Residents screen sets bans: it has a button to ban a household and one to ban a person, and no button to place a suspension. A suspension that exists is treated at the gate exactly like a ban.

Behind on dues comes from a dues list upload, covered below. Owners can also decide what the gate does with it.

Ban a household or a person

Open the Residents screen, then tap the household's address. In the Pool access section you choose one of two buttons.

  • Ban this household stops everyone at that address. You can type a reason, and you confirm with Confirm ban.
  • Ban a specific person lets the family in and bars one name. Pick the person from the household or type a first and a last name. Both names are needed. You can type a reason here too.

What the gate does

The reason you type shows on the staff tablet. The screen also says who set the restriction by role (a manager or an owner) and the date, and never the sign-in name of the person who set it. It tells staff to contact the manager to lift it.

  • Banned or suspended: the staff tablet shows that the household is banned or suspended and does not offer a check-in. The server refuses the check-in too.
  • Behind on dues, with the override on: staff see a warning with the balance due and can choose Check in anyway. The override is recorded on the check-in.
  • Behind on dues, with the override off: the household is turned away like a suspension, and the screen says the community does not allow an override.
  • A person banned by name: staff must confirm that the person is not at the pool before they can submit. A check-in that names a banned person who is 16 or older is refused, and staff remove that name and submit again.

Self check-in kiosk and website widgets

Nobody at a kiosk or on your website can use an override or confirm that a banned person is absent. Any household that is banned, suspended or behind on dues, and any household with a person banned by name, is asked to see the pool staff. The screen does not show the reason.

The override for dues

An owner decides what the gate does with a household that is behind on dues. Open the community, go to Resident rules and use the switch called Gate staff can check in a household that is behind on dues. It is on to start with. A ban or a suspension is turned away whichever way the switch is set.

The dues list upload

The Dues list upload card on the Residents screen reads the dues report from your management software. Choose an Excel or CSV file of up to 10 MB and 10,000 rows. It needs an address column and a sign of who owes: an account status or past due column, a balance or amount due, or a pool access or eligible column that reads the other way round.

You see a preview first, and nothing changes until you confirm. The file is read as a full snapshot. Households it shows as behind on dues are marked, and every other household loses the mark an earlier upload gave it. The preview warns you when households would regain access, so check the count before you confirm. A resident list that carries a dues column in the same file shows the same preview.

How addresses are found

Each address in the file is looked up on your resident list. It is found as written, found after tidying (spacing, punctuation, capital letters and a state or ZIP code after a comma), or found when a shortened address is the whole-word start of exactly one household's address. An address that fits more than one household is left alone rather than guessed at.

The preview counts the households it found and, separately, the addresses it did not. An address that found no household marks nobody today. Pool Check-in keeps it, so if a household is added at that address later, it shows as behind on dues. When a later file leaves the address out, the mark stops applying.

A dues upload changes only the marks that came from a dues upload. A ban you set stays in place when you apply a file, and so does a suspension. A household can hold a ban and a dues mark together. The screen shows the stronger word and keeps the balance in view under it.

Lifting

Open the household on the Residents screen and use Lift beside the ban, then confirm. To lift a ban on one person, use Lift beside that name. The rest of the household is not affected. Lifting a ban does not clear a dues mark the household also has.

A mark from a dues upload is cleared with Clear this mark. The next upload sets it again if the household is still in the file. A later file that leaves the household out clears the mark on its own.

Bans stay in place through resident list uploads, because they belong to the address and the person's name and not to a row on the list.

Check-ins made before a ban

A tablet without a connection doesn't know about a ban or suspension until it reconnects, so it can still check that household in until then. A ban takes effect on each tablet when it next connects. When a check-in held on a gate staff tablet reaches us after the ban or suspension was set, your community decides what happens to it. The choice is on the Residents screen under Check-ins made before a ban or suspension, and owners and managers can change it.

  • Refuse it: the check-in isn't recorded. The gate staff tablet shows it as not accepted. This is the setting every community starts with.
  • Record it: the check-in is saved with the time it was made, and the log and CSV note that the household was banned or suspended before it arrived.

What the late-ban choice covers

This is your community's decision. The time of a tap comes from the tablet's own clock, and we only apply your choice to a check-in held on a gate staff tablet that hadn't been in touch with us since the ban was set. Self check-in and website check-ins are never affected. A check-in made after the ban was set is refused whichever you choose. Bans on a single person follow the same choice. The ban dialog repeats this note and says which choice is on now.

What it does not do

Pool Check-in applies the standing you set and does not decide who should be banned or when. Those decisions are your community's own.